Xerox manual 7300-13

Page 26

Paper Jams

2.Remove any jammed paper.

7300-57

3.Close the door that you opened in Step 1.

4.Pull out the tray specified on the front panel.

7300-13

5.Remove any jammed paper.

6.Make sure that the paper is located correctly in the tray and that the paper guides are set flush against the paper.

7.Push the tray back into the printer.

Note

Even if you don't find any jammed paper, following these steps clears the error and the printer should resume printing.

Phaser® 7300 Color Printer

12

Image 26

Contents Guide Page Contents Accessing printable pages ResourcesPhaser 7300 Color Printer Troubleshooting Web links Calibration Overview Light Color Balance Dark Color Balance Calibrate for Margins Long-Edge Feed Calibrate for Margins Short-Edge Feed Diagnosing Print Quality Diagnosing Print Quality Dark Lines/Smudges or Streaks Incomplete Fusing Paper Jams Preventing jamsWhat causes a paper jam? Jam at Door aJam at the duplex unit Jam at the Multi-Purpose Tray 7300-04 Jam at the top cover7300-06 7300-92 7300 Jam at the tray7300-13 Regular Printer Maintenance Cleaning the printerCleaning Kit 0010 Replacing the FuserReplacing the Fuser Phaser 7300 Color Printer 0010 Replacing an Imaging UnitRemove Packing Material Replacing an Imaging Unit Phaser 7300 Color Printer 0010 Replacing a Toner CartridgeReplacing a Toner Cartridge Phaser 7300 Color Printer Replacing the Transfer Unit 0010Replacing the Transfer Unit Phaser 7300 Color Printer Repacking Instructions 68 kg 149 lbs Index