The quality of image laid down by the printer may not be as good as typically seen with plain paper sheets designed for color xerography, and areas of halftone / solid coverage may degrade more quickly. Please ensure that print quality meets your requirements before committing to extended usage.
Lastly, Xerox Premium Digital Carbonless paper may react with the residual debris left behind by
2– Sided Print ing on Heavyw eight Papers
It is possible to automatically print
Custom Paper Profiles (2nd BTB) will allow you to adjust machine parameters to achieve optimum Image Quality, and color rendition. This adjustment should be performed at regular intervals, and more frequently for heavier weight papers, to maintain consistent output. Refer to the DocuColor 5000APII Sytem Administration Guide for instructions on programming these settings. Environmental factors and job parameters may require additional adjustment.
Note: Xerox Digital Color Supreme Gloss 12pt. must be loaded in the tray such that the uncoated side is imaged first (up) to avoid scratching the soft coating material.
Media and Applic at ions Not in t he Rec om m ended Mat erials List
DISCLAIMER: The information in this section is intended only for those who have a specific request to use a special material or application in the DocuColor 5000AP that is not on the Recommended Materials List. It must be understood that running these types of jobs may result in degraded image quality, an increase in jams, an increase in service calls, or, in the most severe case, damage to the machine. In addition, Xerox cannot provide support for these materials.
Doc uColor 5000 out put Inc om pat ibilit y w it h Doc uTec h Syst em s
A few applications require solutions in which paper needs to be run in a color system with a second printing pass through a black and white printer. Our experience with the Xerox DocuTech line of products has not been positive. Serious contamination issues have been verified when running DocuColor 5000AP output on a Docutech 135 system due to toner composition differences and the difference in fusing temperatures.
If done in the opposite direction (ie. Black and white pass first followed by a DocuColor 5000AP pass) smeared images will occur since the fuser oils used are different in these two systems.
Some systems will have an interposer or inserter drawer where cover or insert materials can be loaded. DocuColor 5000AP output can be fed and inserted within a job using DocuTech systems
For more information on Genuine Xerox Supplies, call | 8 |