Unix Linux, Quick Install Steps | Xerox 6250 instruction

Phaser® 6250 Color Laser Printer

UNIX (Linux)

This topic includes:

■"Quick Install Steps" on page 3-44

■"Additional Resources" on page 3-45

Your printer supports connection to a variety of UNIX platforms through the parallel and network interface. The workstations currently supported by CentreWare for UNIX/Linux to a network-connected printer are:

■Sun Solaris

■IMB AIX

■Hewlett-Packard HP-UX

■DEC UNIX

■Linux (i386)

■Linux (PPC)

■SGI IRIX

The following procedures enable you to connect your printer using any of the supported versions of UNIX or Linux listed above.

Quick Install Steps

From the Printer

1.Verify that both TCP/IP protocol and the proper connector are enabled.

2.At the printer’s front panel, select one of these IP address options:

■Allow the printer to set up a DHCP address.

■Enter the IP address manually.

3.Print the “Configuration Page” and keep it for reference. For information about printing Configuration pages, go to Reference/Features/Front Panel on the User Documentation CD-ROM.

From Your Computer

1.Access www.xerox.com/officeprinting/support, to select your printer type.

■Operating system: UNIX

■File type: Drivers

2.From the list of files provided, download the PrinterPackageXPXX and the file that matches your operating system

3.Print a test page.

3-44