Loading paper in the bypass tray
Demonstrate how to open the bypass tray and load paper.
1.See Figure 10. Open the bypass tray by swing- ing the door down.
2.Ensure the guide at the front of the tray is flipped up unless 13 x 19 in. (330 x 483 mm) paper is being used.
3.See Figure 11. Set the paper guide to the width of the paper being loaded.
4.Load a stack of paper long edge feed and slide the paper into the printer until it stops.
Getting to Know Your Product
2
1 
Figure 10
4
3
Figure 11
Product Orientation Guide | 7 |