The Scanner/ADF control panel
Identify the components of the Scanner/ADF control panel. Point out each item as you discuss it. See Figure 6.
1.The display shows status messages and indicates the selections made during copying.
2.The Contrast Dial is used to adjust the bright- ness of the display.
3.The Control Panel Buttons provide control of the copier functions.
•The Keypad buttons 0 through 9 and * are used to enter the number of copies or a pass- word. The C button clears an incorrect entry.
•Copy places the machine into the copy mode.
•Tools is used to confirm or change functions and settings of the machine. The Tools button is for use by System Administrators and is password protected.
•Clear All clears all programming and copy quantities. Places all settings at their default values.
•Stop allows you to temporarily stop a job.
•Start initiates a scanning or copying job.
•Exit cancels the selected function.
•Select confirms the selection of a function.
•s moves to the previous item in a list, or the function before this one.
•t moves to the next item in a list, or the function following this one.
•Lighten Darken adjusts the copy contrast.
•Original Type allows selection of color or black and white copies.
4.The Paper Supply buttons allow a specific paper tray to be selected for a copy job. The selected paper tray indicator lights and the paper size appears in the display.
5.The Reduce/Enlarge buttons allow a specific reduction or enlargement ratio to be selected. The zoom buttons may be used to select reduc- tion or enlargement in 1% increments.
1 | 2 | 3 |
5 | 4 |
|
|
|
Figure 6
Getting to Know Your Product
Product Orientation Guide | 5 |