Xerox 2045 manual Paper Guidelines, Recommended Baseline/Centerline

Page 27

E N H A N C E D H I G H C A P A C I T Y S T A CK E R

Paper Guidelines

• Stacker Tray will accept 64 - 280 g/m2 - either coated or uncoated stock with possibility of degraded stock quality and increased jam rate

•Transparencies may be run to either the Top Tray or the Stack Tray. Stack height should be limited to 100 transparencies.

•Coated paper lighter than 100 g/m2 may not run as reliably as coated paper heavier than 100 g/m2.

•Non-standard papers longer than 305 mm (12") in the feed direction require 210 mm (8.3") minimum measurement across the feed direction.

•Non-standard papers shorter than 254 mm (10”) in the cross-feed direction require 330 mm (13”) minimum measurement in the feed direction.

Recommended Baseline/Centerline

The following papers are considered to be baseline/centerline and are recommended to ensure you receive the best quality from your EHCS:

•Uncoated: Xerox Digital Color Xpressions +, 90 g/m2, 24 lbs. In Europe, Xerox Digital Color Colotech+ 90 g/m2.

•Coated: Xerox Digital Color Gloss Coated Text (120 g/m2 /80 lbs.) In Europe, Xerox Digital Color Colotech + Gloss Coated 120 g/m2.

ENHANCED HIGH CAPACITY STACK ER

EHCS F O R D O C U C O L O R 2060/2045 OP E R A T O R MA N U A L

5

Image 27

Contents Page Page Table of Contents Table of Contents Use only the power cord supplied with this equipment Electrical SafetyDisconnect Device Laser Safety Maintenance SafetyThis equipment complies with international safety standards Operational Safety Ozone Safety This page is intentionally blank FCC in the USA Radio Frequency EmissionsCertifications in Europe Safety Extra Low Voltage ApprovalCoupons from Bonds It’s Illegal in the USAPhysical or mental condition It’s Illegal in Canada Environmental Notices for Canada Environmental Notices for the USAProduct Recycling and Disposal Xvi Conventions SymbolsXviii Writing Style Conventions This page is intentionally blank With the Ehcs you can Enhanced high capacity stackerIdentifying the Parts Top Tray Control Panel Front Door access to StackerName Function Control PanelBypass Paper PathTop Tray Stacker TrayRecommended Baseline/Centerline Paper GuidelinesPaper Size Output Paper SpecificationsUnloading the Stacker Tray Obtaining a Sample Set Selecting FeaturesTouch Save Select StackerSelect the Stacker button, under the Output Device column How to Enable OffsetSelect Save Select the followingJam Clearance Clear Bypass area jamClose each green handle Close the Ehcs Top Cover Clear Top Tray and Stacker Tray paper jams Problem Solving MaintenanceIf power is interrupted to the Ehcs Loss of PowerH a N C E D H I G H C a P a C I T Y S T a CK E R