SPEAKER SETUP (Continued)
Setting the test tone
Use the test tone to check the speaker connection status or level.
1.Press SETUP/MENU button.
~“INPUT” appears on the display and goes into Setup Mode.
2.Press ▲▼ button to select "SPEAKER", and then press the
ENTER.
3.Press ▲▼ button to select "TEST TONE", and then press the ENTER or ▶ button.
4.Press ▲▼ button to select the option you want, and then press the ENTER or ▶ button.
~AUTO : Test signal will be automatically output as follows; F.L CEN S.W F.R S.R SBR SBL S.L.
-During test tone output, press ▲▼ button to adjust the speaker output level from
~MANU (MANUAL): Enables you to adjust the output level of the speaker manually.
1)Press ◀▶ button to select the speaker you want.
Each time you press ◀▶ button, F.L CEN S.W F.R S.R SBR SBL S.L will be selected in turn.
2)Press ▲▼ button to set the test tone as you want.
You can adjust the speaker output level from
Test Tone Output |
|
• F.L (front left) : | • S.R (surround right) : |
• CEN (center) : | • SBR (surround back right) : |
• S.W (subwoofer) : | • SBL (surround back left) : |
• F.R (front right) : | • S L (surround left) : |
- To stop test tone -
~Press SETUP/MENU or EXIT button once time. “SETUP OFF” appears on the display and test tone stops.
36