Operating your DVD or BD player with the remote control
1.Press POWER button to turn on the DVD (BD) player.
2.Press DVD (BD) button to set the remote to DVD (BD) mode.
~If you operate VCR, press VCR button to set the remote to VCR mode.
3.Point the remote control toward the DVD (BD).
4.While holding down POWER button, enter the code corresponding to your brand of DVD (BD).
~If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works.
~If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off.
5.If DVD (VCR) is turned on or off when you press the power button of the remote controller, the setting is completed.
~You can use DVD (BD) POWER, VOLUME, PLAY, PAUSE, STOP, SKIP, MENU and Numeric button (0~9).
M ` The remote control may not work on some brands of DVD (BD).
Also, some operations may not be possible depending on your brand of DVD (BD).
`The remote control will work with Samsung DVD (BD) by default.
DVD Brand Code List
Brand | Code Number | Brand | Code Number | Brand | Code Number |
DENON | 003, 032 | ONKYO | 004, 014 | TOSHIBA | 004, 018 |
DOONOON | 019 | OPTIMUS | 011 | YAMAHA | 009, 033 |
DMTECH | 017 | PANASONIC | 021 | ZENITH | 004, 024 |
FISHER | 002 | PROSCAN | 006 | TAEGWANG | 026 |
GE | 006 | PHILIPS | 004, 023 | PS2 | 028 |
HARMAN/KARDON | 012 | PIONEER | 007, 011, 022, 025 | 029 | |
JVC | 010, 013 | RCA | 006 | APEX | 030 |
KENWOOD | 008 | SAMSUNG | 000, 027 | Marantz | 031 |
LG | 001 | SANYO | 002 |
|
|
MAGNAVOX | 004 | SONY | 015, 020 |
|
|
MITSUBISHI | 005, 016 | THETA DIGITAL | 011 |
|
|
BD player Brand Code List
|
| Brand | Code Number |
| SAMSUNG |
| 000, 001, 002, 003, 004 |
|
|
|
|
M ` | For the BD player, only a Samsung product can be controlled with the remote control. |
58