Canon VF-1 dimensions Programming

Page 11

Here is a photo of the sensor location on the Samsung C8380ND.

Use caution when installing the sensor so that it does not interfere with the normal operation of the copier

You are now ready to apply power and begin programming your VendaFax.

Programming

The chart below shows the DIP switch meaning and use in programming. Please refer to this chart when programming your VendaFax module.

Switch 1 - On Position – Reserved for future use

Switch 1 – Off Position – Incoming ring detection d isabled from sending fax device. Switch 2 – On Position – Bypass mode.

Switch 2 – Off Position – Normal Operating mode. Switch 3 – On Position – Pulse Test.

Switch 3 – Off Position – Normal Operating mode. Switch 4 – On Position – Program mode.

Switch 4 – Off Position – Normal Operating mode.

Please refer to the photo below for switch numbering, on and off positions.

Corporate Headquarter: 16381 Cherokee Road Brooksville, Florida 34601 352-796-2693

Factory: 21B Squires St. Cortland, NY 13045 607-428-0627

Image 11
Contents Mounting Guidelines Parts ListPage Wiring Specifications Page Line Connections Page Photo Sensor Mode Page Page Page Programming Page Programming for Photo Sensor Use Programming the Vend Device Basic Operation of Straight Thru Dialing ModeBasic Operation of Store and Forward Mode One-Year Warranty and Service Policy Disclaimer Return Authorizations