Value>>, Feature, Implementation, Values

Feature	Implementation	Values
		thick2 side2[B] = Extra HW (X-HW) B
		Reload
		thick2 side2[C] = Extra HW (X-HW) C
		Reload
		thick2 side2[S] = Extra HW (X-HW) S
		Reload
Media Type	<</MediaType (string)>>	Where string is any value or null*.
	setpagedevice	(MediaType will not affect tray selection.)
Media	<</DeferredMediaSelection	Where value is one of the following:
Selection	value>>	true = Deferred media selection by output
	setpagedevice	device (more powerful and flexible
		media selection)*
		false = Immediate media selection by
		strict setpagedevice operator
		To select the appropriate media when
		using MediaClass / Staple / Punch feature,
		value must be set to true intentionally in the
		beginning of header.
Print Mode	<</HWResolution [x y]	Where combination of x, y and int1 is one
	/DeviceRenderingInfo << /Type	of the following:
	26 /ValuesPerColorComponent	x y int1 = …
	int1 >>	600 600 2 = 600x600dpi 1bit/color
	>>	600 600 256 = 600x600dpi 8bits/color
	setpagedevice	1200 1200 2 = 1200x1200dpi 1bit/color
Duplex	<</Duplex value>>	Where value is one of the following:
	setpagedevice	true = Duplex
		false = Simplex*
Tumble	<</Tumble value>>	This feature is effective only in conjunction
	setpagedevice	with that Duplex is true
		Where value is one of the following:
		true = Tumble (Short edge binding
		Duplex)
		false = Duplex (Long edge binding
		Duplex)*
Image	<</PostRenderingEnhance true	Where int is one of the following:
Enhancement	/PostRenderingEnhanceDetails	0 = No image enhancement
	<< /Type 32 /REValue int >>	1 = Activate image enhancement*
	>>
	setpagedevice
Toner Save	<</PostRenderingEnhance true	Where int is one of the following:
	/PostRenderingEnhanceDetails	0 = No toner saving*
	<< /Type 32 /TonerSaver int >>	1 = Lighten output density, toner saving
	>>
	setpagedevice

dc09cc0453

Customer Support

Page 19

value>>