Xerox 7425/7428/7435 PCL/PJL Implementation, Values, jobname-string, LETTERCOVER = 9 x, Feature

PCL/PJL Implementation

The following table contains the PCL feature commands and shows the syntax required to use the feature. After the table are examples of how to use these commands and examples of a PCL file.

Feature	Implementation	Values
Job Name	@PJL SET JOBNAME =	Where jobname-stringis a maximum of 32
	"jobname-string"	characters
Custom	You have to specify by PCL:	ƒ Width of Custom Paper is specified by
Paper Size –	<ESC>&l101A	<ESC>&f#I
available only		where # equals decipoints (89 mm – 320.0
for PCL		mm).
		ƒ Length of Custom Paper is specified by
		<ESC>&f#J
		where # equals decipoints (98 mm – 483
		mm).
		For instance:
		4.25-inch x 5.5-inch will give
		<ESC>&f3060I3960J by
		4.25-inch x 720 decipoints/inch = 3060
		and
		5.5-inch x 720 decipoints/inch = 3960
Media Size	@PJL SET PAPER = value	Where value is one of the following:
		A3: A3 (297 x 420mm)
		A4: A4 (210 x 297mm)
		A5: A5 (148 x 210mm) *
		JISB4: B4 (257 x 364mm)
		JISB5: B5 (182 x 257mm)
		STATEMENT: Statement (5.5 x 8.5”) *
		EXECUTIVE: Executive (7.25 x 10.5”) *
		LETTER: Letter (8.5 x 11”)
		JISEXEC: 8.5 x 13”
		LEGAL: Legal (8.5 x 14”)
		LEDGER: Tabloid (11 x 17”)
		ROC16K = 16K (194 x 267mm) *
		ROC8K = 8K (267 x 388mm) *
		16KAIGCO = 16K (195 x 270mm) *
		8KAIGCO = 8K (270 x 390mm) *
		* Whether each paper is available depends on
		NV memory setting.
		The following paper sizes are only available with
		bi-pass tray.
		A6: A6 (105 x 148mm)
		JISB6: B6 (128 x 182mm)
		8X10 = 8 x 10"
		SPANISH = 215 x 315mm
		11X15 = 11 x 15"
		A4COVER = A4 Cover (223 x 297mm)
		LETTERCOVER = 9 x 11"
		12X18 = Oversized Tabloid (12 x 18")
		SA3 = SRA3 (320 x 450mm)

dc09cc0453

Customer Support Page 3