Xerox quick start For Network Printing WorkCentre PE120i only

For Network Printing (WorkCentre PE120i only)

You can attach your machine to a network using an Ethernet cable (UTP cable with RJ.45 connector).

The WorkCentre PE120i has a built-in network interface card.

1Make sure that both the machine and the computer are turned off.

2Plug one end of the Ethernet cable into the Ethernet network port on your machine.

3Plug the other end of the cable into a network LAN connection.

NOTE: After connecting the machine, you need to configure the network parameters on the control panel. See your machine’s System Administration Guide.

1.14SETTING UP YOUR PRINTER