FINISHER-V1/SADDLE FINISHER-V2 WITH OPTIONAL
PUNCHING, FOLDING, AND TRIMMING
Corner or double staple sets of up to 100 letter-sized pages (50-sheet stapling for letter-R,legal, and ledger sets) and stack up to 5,000 sheets with the optional Finisher-V1or
Saddle Finisher-V2.
Both Finishersprovide an upper 3,000-sheet offset tray and
alower 2,000-sheet offset tray for non-stop collatingwith cascade loading and may be equipped with precision two- and three-hole punching through the internal Puncher Unit-V1option (not shown). The optionalDocument Insertion Unit-C1can be installed on top of either Finisher to enable the feeding of heavyweight or pre-printed covers. Like the Document Insertion Unit found on the Perfect Binder-A1, it offers dual 200-sheettrays to collate covers into job streams after fusing to preserve the imagequalityof pre-printed pages. And, either Finisher may be configuredwith the optional Paper Folding Unit-D1to Z-fold11" x 17" pull-outpages, such as financial spreadsheetsor large graphic illustrations, into document sets with a finished 8-1/2" x 11" size.
The Saddle Finisher-V2matches all the specificationsof the Finisher-V1and adds booklet-making capabilities (up to 80 imaged pages). For even greater productivity, add the Booklet Trimmer-C1. This option attaches to the Saddle Finisher-V2to trim the open end of booklet sets for a flush, professional edge. After trimming, the booklets are delivered to an output tray via a conveyor belt for easy retrieval.
