Philips 950 manual Remarks about recording Recording modes English, Some remarks on recording

Page 14

RECORDING

Remarks about recording

 

Recording modes

English

You will soon discover how easy it is to make your own CDs. Nevertheless, it is advisable to use a CDRW disc for your first try.

If the disc is a CDRW and is already finalized you must unfinalize it first.

The recording procedure is the same for CDRs and CDRWs.

If the disc already contains recordings, the CD recorder will automatically search for the end of the last track, so that recording can start from there.

There must be at least 7 seconds of recording time left on the disc, otherwise you will not be able to enter record standby mode. DISC FULL then lights up.

If the display indicates COPY PROTECT, no digital recording can be made of the source material. Recording will not start.

The Serial Copy Management System (SCMS) only allows digital recording under specific conditions:

-This means that it is not possible to make a digital copy from a digital copy.

-Analog recording is always possible !

-The number of recordings from the original is unlimited.

A maximum of 99 tracks can be recorded on a disc. Minimum allowable track length is 4 seconds.

Recordings from DAT or DCC players will not always stop automatically.

Your recorder offers several recording modes.

-RECORD DISC - to make a synchronized recording of the complete disc or a program simply by starting the source.

-RECORD TRACK - to make a synchronized recording of a single track simply by starting the source.

-REC(ord) MANUAL - to manually start a recording simply by pressing the RECORD key.

-MAKE CD - to make a synchronized recording of the complete disc or a program simply by starting the source. Finalising will be done automatically.

 

REM

REC

TIME TRACK

TOTAL REM TRACK TIME FADE

STEP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL I

I

 

 

 

PROGRAM

 

 

 

 

 

MANUAL SYNC

SCAN

OPTICAL I

 

 

CD RW

 

 

 

 

 

 

 

SHUFFLE REPEAT TRACK ALL

ANALOG

 

 

 

 

 

 

 

 

 

Some remarks on recording:

-When Auto track is ON (default setting), track numbers will automatically be increased during recording.

-By programming the source first, a compilation can be recorded.

-If a finalized CD recordable disc is inserted in the CD recorder, FINALIZED CD will be displayed when REC TYPE is pressed. Recording is not possible.

-If a finalized CD rewritable disc is inserted in the CD recorder, UNFINALIZE and PRESS ENTER will be displayed when the REC TYPE is pressed. If ENTER is pressed, the disc will be unfinalized.

Important:

If you want to play the recorded CDR disc on any regular CD player, it must first be finalized. See finalising discs.

Finalized CDRW discs play only on CDRW compatible CD players.

For recording from CD changers do not use REC MANUAL.

15

Image 14
Contents CDR950/951 General Information For Customer UseContents Table of Contents General Technical dataAbout this manual AudioGeneral Information and Discs Discs for recording Maintenance EnglishAccessories Discs for playbackConnections at the back Controls and ConnectionsControls on the front EnglishDisplay messages DisplayDisplay indications Menu messages See Menu mode Installation Connections general Analog connections English Digital coaxial connections Digital optical connections Setup recommendations Inserting discs Remote ControlEnglish Remote control commands Number/alphabet keys 0Some remarks on recording RecordingRemarks about recording Recording modes English Autostart recording Preparing for autostart recordingPreparing for manual recording Start manual recordingKaraoke recording Sample rate convertor Monitor modeMicrophone recording Microphone recordingManual finalizing Finalizing CDR & Cdrw discs Unfinalizing Cdrw discs EnglishAuto finalizing For Cdrw discs onlyTo erase the entire disc English Erasing Cdrw discsTo erase one or more tracks from the end Press RecordSearch PlayingPlaying a CD English Selecting a trackRemarks about programming Playing ProgrammingEnglish Repeat CD, track or program Menu Mode Remarks about Menu modeText Memory Review/Erase Text Memory Rename input sourceAdjust recording balance by turning the Easy JOG/ENTER key Recording settingsBalance Only active in Record/Standby mode Auto track incrementFixing Problems 3104 125