Philips 950 manual Playing a CD, Search, English Selecting a track, Shuffle random order play

Page 20

Playing a CD

RECORD

1 Press PLAY/PAUSE 2 ; to start CD play.

➜2 lights up and the track number and track time of the track in play appear on the display.

2 Press DISPLAY once, twice or three times to see:

➜Remaining track time, total remaining time, text information (see Menu Mode).

3 To interrupt play temporarily, press PLAY/PAUSE 2 ; again.

➜; lights on the display

4 To continue play, press PLAY/PAUSE 2 ; again.

5 To stop play, press STOP 9.

➜The number of tracks and the total playing time appear on the display.

PLAYING

Selecting a track when CD play is stopped

1 Turn the EASY JOG/ENTER key until the required track number appears on the display.

2 Press EASY JOG/ENTER or ENTER on the remote control to confirm or press PLAY/PAUSE 2 ; to start playing.

or

1 Key in the required track number using the numerical keys on the remote control. For 2-digit track numbers, press the keys in rapid succession. Play starts.

or

1 Briefly press Á or ª one or more times.

2 Start playback by pressing PLAY/PAUSE 2 ;, EASY JOG/ENTER or ENTER on the remote control.

Search

RECORD

English

Selecting a track

RECORD

Selecting a track during play

1 Turn the EASY JOG/ENTER key until the required track number appears on the display.

➜Play skips to the beginning of the selected track.

or

Key in the required track number using the numerical keys on the remote control. For 2-digit track numbers, press the keys in rapid succession.

➜Play skips to the beginning of the selected track.

or

Press Á or ª on the remote control one or more times.

➜Play skips to the beginning of the present, previous or

subsequent tracks.

1 Hold down 5 or 6.

➜The player first searches backwards or forwards at 10 times normal speed with sound at low volume, then goes to 50 times normal speed with sound muted.

2 Release the button at the desired passage.

➜Play starts at the desired passage.

Note: During Shuffle, Repeat Track or Programmed play, search is restricted to within the track being played at the time.

Shuffle (random order) play

1 Press SHUFFLE before or during CD play to start shuffle play.

➜The tracks on the CD (or program if set) play in random order.

2 Press SHUFFLE again to return to normal CD play.

Note: Shuffle is also cleared if you open the disc tray.

21

Page 19 Page 21
Image 20
Page 19 Page 21
Contents CDR950/951 General Information For Customer UseContents Table of Contents Technical data About this manualGeneral AudioDiscs for recording Maintenance English AccessoriesGeneral Information and Discs Discs for playbackControls and Connections Controls on the frontConnections at the back EnglishDisplay messages DisplayDisplay indications Menu messages See Menu mode Installation Connections general Analog connections EnglishDigital coaxial connections Digital optical connections Setup recommendations Remote Control English Remote control commandsInserting discs Number/alphabet keys 0Some remarks on recording RecordingRemarks about recording Recording modes English Autostart recording Preparing for autostart recordingPreparing for manual recording Start manual recording Sample rate convertor Monitor mode Microphone recording Karaoke recording Microphone recordingFinalizing CDR & Cdrw discs Unfinalizing Cdrw discs English Auto finalizingManual finalizing For Cdrw discs onlyEnglish Erasing Cdrw discs To erase one or more tracks from the endTo erase the entire disc Press RecordPlaying Playing a CDSearch English Selecting a trackRemarks about programming Playing ProgrammingEnglish Repeat CD, track or program Menu Mode Remarks about Menu modeText Memory Review/Erase Text Memory Rename input sourceRecording settings Balance Only active in Record/Standby modeAdjust recording balance by turning the Easy JOG/ENTER key Auto track incrementFixing Problems 3104 125
Top Page Image Contents