Canon PIXMA MG6120 manual Character Entry

Page 9

Connecting Your MG6120 To Your Network

 

<< Previous

 

Next >>

 

 

 

 

 

Step 7 (continued) Character Entry

This machine allows you to enter characters when an on-screen keyboard is displayed. Follow the procedure below.

1. When the on-screen keyboard shown above is displayed, touch the center FUNCTION button (A) to switch to a keyboard having the characters you want to use.

Four character sets are available: Upper-case alphabets, lower-case alphabets, numbers, and symbols. Each time you touch the center FUNCTION button, the on-screen keyboard is switched among them.

9

Image 9
Contents Next Previous Next Preparing to Connect My Multifunction To My Network Place the machine and computer on the same network segment Connecting Your MG6120 To Your Network Select Yes, then touch the OK button Screens is displayed, then touch Connecting Your MG6120 To Your Network Character Entry Connecting Your MG6120 To Your Network Your MG6120 is now connected to your network Installing The MG6120 Software Installing The MG6120 Software Step Select Use the printer on network On the Canon IJ Network Tool screen Appears in the list Screen appears, click Add Installing The MG6120 Software Register Scanner Wireless setup is now complete