Canon PIXMA MG6120 manual Screens is displayed, then touch

Page 7

Connecting Your MG6120 To Your Network

 

<< Previous

 

Next >>

 

 

 

 

 

Step 5

Step 6

Select the access point name you

Make sure that one of the below

wrote down, then touch the OK

screens is displayed, then touch the

button.

right FUNCTION button.

If neither is displayed, go to Step 9.

Note:

•Nearby access points may be detected.

•Access point names with 2-byte characters are not displayed properly, however, they can be selected.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Next Previous Next Preparing to Connect My Multifunction To My Network Place the machine and computer on the same network segment Connecting Your MG6120 To Your Network Select Yes, then touch the OK button Screens is displayed, then touch Connecting Your MG6120 To Your Network Character Entry Connecting Your MG6120 To Your Network Your MG6120 is now connected to your network Installing The MG6120 Software Installing The MG6120 Software Step Select Use the printer on network On the Canon IJ Network Tool screen Appears in the list Screen appears, click Add Installing The MG6120 Software Register Scanner Wireless setup is now complete
Top Page Image Contents