Display Contrast selection

The contrast of the display can be adjusted.

You can adjust :

• – 10 ~ 0 ~ +10

1. Repeatedly press the DISP to display the “CONTRAST” on the display window.

2. Rotate the dial to select the desired display contrast.

– 10 + 10

Message ON/OFF selection

Message display following POWER ON/OFF can be switched.

You can adjust :

• MESSAGE ON : A message is displayed following power on/off.

• MESSAGE OFF : No message is displayed.

1. Repeatedly press the DISP to display the “MESSAGE ON” on the display window.

2. Rotate the dial to select whether or not to display a mes-

sage following power on/off.

OFF

How to defeat Demo Mode

After installation we recommend defeating the Demo Mode. When power is turned off, the unit switches to demonstration mode.

The demonstration starts about 10 seconds after power off. The demonstration of each function is repeatedly shown on the display screen.

You can adjust :

•	DEMO ON		: The demonstation is displayed after
			power off.
•	DEMO OFF		: A demonstration is not displayed after
			power off.
1.		Repeatedly press the DISP to display the “DEMO ON”.
2.		Rotate the dial to select whether or not the demonstra-
		tion should be displayed when power is off.

DEMO OFF

DEMO ON

Enhancing the bass sound
For extended bass centered @ 72Hz, Blaupunkt’s XBASS func-			ENGLISH
tion can be set for either each band and CD/MP3/CDC/AUX			ENGLISH
tion can be set for either each band and CD/MP3/CDC/AUX
mode.
You can select :
•	XBASS 1	: Enhanced BASS level (low).
•	XBASS 2	: Enhanced BASS level (Middle).
•	XBASS 3	: Enhanced BASS level (High).
•	XBASS 4	: Enhanced BASS level (Very high).
• XBASS 0		: No BASS enhanced.

Press the XBASS repeatedly to select the bass sound.

“ ” appears on the display window. (Except for XBASS 0) Each time you press XBASS , the current mode appears on the display window and the mode change as follows: