Blaupunkt MP3000 MP3 / WMA operation, MP3 / WMA play, ID3 Tags are not supported for WMA files

MP3 / WMA operation

	You can play MP3 and WMA files written on CD-ROMs, CD-
	Rs, or CD-RWs by following the procedures below.
ENGLISH	In this section, “track” and “album” mean “MP3 or WMA file”
	and “folder” in PC terminology, respectively.
	MP3 / WMA play
	Loading Discs
	1. Press the OPEN and insert a CD-ROM, CD-R, or CD-RW
	with the labeled side upward.
	2. Close the front panel.
	During scanning of the disc, ‘‘LOADING’’and ‘‘FILE CHECK’’
	appear in the display window.
	Playback begins automatically.
	CD-R/RW with very complex folder trees could take in the
	range of 20-seconds to load.

Listening to a disc that is already loaded

Press the	CD	to select the CD mode.
Playback begins automatically.
Pausing Playback
Press the	6/ .
To resume playback, press the 6/ again.
Stopping Playback
Press the	BND / TS to select the radio reception (FM 1, FM 2,

FT or AM, AT).

Ejecting Discs

Press the to eject the disc located behind the flip-down front panel.

Notes

•The unit will turn on automatically when a CD is inserted if the ignition switch is ‘‘ON’’.

•When the disc is ejected from the CD slot, remove it within 10 seconds; otherwise, the disc will be reloaded automatically.

•ID3 Tags are not supported for WMA files.

E-12

Track Search

Press the TUN/ TRK during CD mode. Track numbers appear in the display window.

: Playback starts from the beginning of the next track.

: Playback starts from the beginning of the current track. Press again to play the previous track.

Album(Folder) Search

Press the FOLDER + or FOLDER – during CD mode. Folder indica- tor “ ” flashes in the display window.

FOLDER +	: Playback starts from the beginning of the next folder.
FOLDER –	: Playback starts from the beginning of the previous
	folder.

Cue / Review

Press and hold the TUN/ TRK . Release when you have found the desired point.

: To search forward.

: To search backward.

Scan / Folder Scan Play

Scan Play (Mode1)

Press the SC/PS during CD mode.

The ‘‘SCAN 1 ON’’ appears in the display window. This will play the first 10 seconds of all the tracks on the disc.

Press the SC/PS again to cancel this feature.

Folder Scan Play (Mode2)

Press the SC/PS for more than 2 seconds during CD mode. The ‘‘SCAN 2 ON’’ appears in the display window. This will play the first 10 seconds of first tracks in each folder.

Press the SC/PS again to cancel this feature.

Repeat / Folder Repeat Play

Repeat Play (Mode1)

Press the 5/RPT during CD mode.

The ‘‘RPT 1 ON’’ appears in the display window and the cur- rent track is played repeatedly.

Press the 5/RPT again to cancel this feature.

Folder Repeat Play (Mode2)

Press the 5/RPT for more than 2 seconds during CD mode. The ‘‘RPT 2 ON’’ appears in the display window and the cur- rent folder is played repeatedly.

Press the 5/RPT again to cancel this feature.

Mix Play / Folder Mix

Mix Play (Mode1)

Press the 4/MIX during CD mode.

The ‘‘MIX 1 ON’’ appears in the display window.

All the tracks on the current folder are played in random or-

der. Press the	4/MIX again to cancel this feature.
Folder Mix Play (Mode2)
Press the 4/MIX	for more than 2 seconds during CD mode.

The ‘‘MIX 2 ON’’ appears in the display window.

All the tracks on the current disc are played in random order. Press the 4/MIX again to cancel this feature.

ID3 Tag Jump

When a file containing an ID3 Tag is played, pressing 3/JUMP immediately switches the unit to ID3 Tag scroll display. When the scroll display finishes, the original display is restored. When pressed 3/JUMP while scroll display has priority, the origi- nal display is restored after displaying “TRACK/TIME” for five seconds.

Tip

When playing a file that does not contain an ID3 Tag or when playing a WMA file, pressing 3/JUMP causes “NO NAME” to be displayed.

MP3000_body_en 12 9/4/01, 4:24 PM