Blaupunkt MP3000 General Operations, Turning the power On/Off, Volume Level Control and Memory

Models: MP3000

1 21
Download 21 pages 51.43 Kb
Page 5
Image 5

General Operations

ENGLISH

Turning the power On/Off

Press the PWR to turn on or off the unit.

 

 

Tip

 

When you turn on the unit, “BLAUPUNKT MP3 - I WANT MY

 

MP3!” will be displayed before actual power on.

 

When you turn off the unit, “BYE - BYE” will be displayed

 

before actual power off.

 

You can edit these message. (See “Turn on/off message

 

edit”)

Volume Level Control and Memory

Rotate the dial to adjust the volume.

It is also possible to set the maximum volume when the power is switched on by following the procedure explained below.

1. Turn the dial until it is set at the required volume.

Volume down

Volume up

2. Press the PWR for two or more seconds. The power will be switched off and the Turn-On volume level is saved.

Muting the sound

Press MUTE / SENS .

“MUTE” appears on the display window.

To restore the previous volume level, press MUTE / SENS again.

E-4

Setting the Clock

The clock uses a 12-hour display system. (factory set)

1.

Turn the ignition key to the ON position.

2.

Press the PWR

to turn on the unit.

3.

Repeatedly press the

DISP

to display “CLOCK 12”.

4.

Rotate the dial within 5 seconds to select the 12 or 24-

 

hour time mode. Each time you rotate the dial, the mode

 

changes or toggles as follows :

 

CLOCK 24

 

 

 

CLOCK 12

 

 

5.

Repeatedly press the

DISP

to display “CLOCK ADJUST”.

 

A. Press the MUTE / SENS

within 5 seconds to flash the hour digit.

 

B. Rotate the dial to set the hour digit.

 

C. Press the

MUTE / SENS

to flash the minute digit.

 

D. Rotate the dial to set the minute digit.

6.

Press the DISP

momentarily to complete the Clock set-

 

ting mode.

 

 

 

Note

If you make no button input or dial operation in 20 seconds, the Clock setting mode will turn off automatically.

Ignition-off Clock Recall

The display will illuminate showing the time and then auto- matically shut off after 5 seconds.

Press the DISP while the ignition switch is in the “OFF” posi- tion.

Adjusting the Sound Characteristics

1. Press the AUDIO to select the desired adjustment mode

as follows;

BASS 0 TREBLE 0 LOUD OFF BAL L0 R0 FAD R0 F0

(LOUDNESS) (BALANCE) (FADER)

2. Rotate the dial to adjust the selected item.

Adjust within 3 seconds after selecting the item. After 3 seconds, the dial reverts to volume control. Use the fol- lowing tables as a guide for adjusting the settings in each mode.

Adjustment Range

BASS

BASS –5

BASS +5

 

 

 

TREBLE

TREBLE –5

TREBLE +5

 

 

 

LOUDNESS

LOUD OFF

LOUD ON

 

 

 

BALANCE

L9 R0 (Full left)

L0 R9 (Full right)

 

 

 

FADER

R9 F0 (Full rear)

R0 F9 (Full front)

 

 

 

Tip

Settings for BASS, TREBLE, LOUDNESS and XBASS can be made to each of the following modes independently:

FM, AM, CD, MP3, CD Changer and AUX.

MP3000_body_en

4

9/4/01, 4:23 PM

Page 5
Image 5
Blaupunkt MP3000 manual General Operations, Turning the power On/Off, Volume Level Control and Memory, Setting the Clock