3.4 VIDEO Upconversion Chart
HDMI HDMI
YPbPr
S-VIDEO S-VIDEO
VIDEOVIDEO
VIDEO INPUT
VIDEO OUTPUT
YPbPr MONITOR

SET UP YOUR SPEAKER SYSTEM

six speakers system, you can have
a good sound field effect, the rear
speakers provide widely diffused sound,
Center speaker use for dialogue environment.
If you want to feel low frequency effect
and vibrant atmosphere, sub woofer
is essential.
Centre speaker
Subwoofer
Front speaker
Front speaker
Surround
speaker
Surround
speaker
Delay

PLACE OF SPEAKERS

Main speakers can put on the usual
position.
Centre speaker in the central
position should upper or lower
than TV screen to avoid magnet
influence, or use magnet proof
speakers. The place of subwoofer
is not so critical because low
frequency without highly directional.
Rear surround speakers,
which behind your listening position,
should be nearly 2 meters up the floor.

SPEAKER CHOICE

Speaker should be powerful enough.
Main speaker, Centre and surround speaker impedance all should be 8.
Subwoofer impedance should be 6 .
Centre speaker
Subwoofer
Front speaker
Surround speaker
surround speaker
Front speaker
4. Speakers connection
6
This feature will automatically transfer all formats of video signal into the formats that output the
video signal of DKR-510 to monitor.
Four types of video signal for the video input / output circuit of DKR-510
Digital video signal: HDMI
Analog video signal: Component video, S-video and video
Please connect the monitor output by the types of terminal as the same as video input terminal
when disuse this function.
HDMI signals can not be switched to analog signals.
The function of video switch may out of operate when input non-standard video signals from
game player or the other audio sourcing.