Acesonic DKR-510 user manual FM/AM Antenna

REAR PANEL

1 2 3 4 5

SUB WOOFER SURROUND SOUND SPEAKERS

6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

1.FM/AM ANTENNA IN

Use FM/AM antenna to connect to these jacks.

2.HDMI OUTPUT

Use HDMI cable to Connect to external video device like monitor with HDMI input.

3.HDMI INPUTS

Use HDMI cable to Connect to HDMI output from external A/V devices like HDMI DVD player.

4.MIC3 INPUT

Connect to a microphone by using 1/4" microphone cable .

5.MIC3 VOL

This knob is used to adjust the volume of MIC 3 input.

6.WOOFER SPEAKER TERMINAL

Using speaker cable with exposed wires or banana plugs to connect to woofer speaker, the impedance equal or more than 6-16 OHM.

7.SURROUND SPEAKER (RIGHT) TERMINAL

Using speaker cable with exposed wires or banana plugs to connect to surround speaker(right), the impedance equal or more than 8-16 OHM.

8.SURROUND SPEAKER (LEFT) TERMINAL

Using speaker cable with exposed wires or banana plugs to connect to surround speaker(left), the impedance equal or more than 8-16 OHM.

9.CENTER SPEAKER TERMINAL

Using speaker cable with exposed wires or banana plugs to connect to center speaker. The impedance equal or more than 8-16 OHM.

10.MAIN SPEAKER (RIGHT) TERMINAL

Using speaker cable with exposed wires or banana plugs to connect t to front speaker(right),

the impedance equal or more than 8-16 OHM.

11. MAIN SPEAKER (LEFT) TERMINAL

Using speaker cable with exposed wires or banana plugs to connect to front speaker(left), the impedance equal or more than 8-16 OHM.

12. 5.1 CHANNEL DVD/AC-3 AUDIO OUTPUTS

Using composite audio cables for analog 5.1 ch. Dolby/AC-3 audio output.

13. RECORD OUT L/R RCA OUTPUT

Connect to a recording device, powered speakers, or any device with RCA L/R audio inputs.

14. RCA VIDEO and S-VIDEO OUTPUT

Connect to a TV with an RCA or S-Video input. Make sure that the correct input channel is select.

15. AUX2 AUDIO and VIDEO/S-VIDEO INPUT

AUX2 audio and video/s-video input channel. Connect here using an RCA cable or S-Video cable.

16. AUX1 AUDIO and VIDEO/S-VIDEO INPUT JACK

AUX1 audio and video/s-video input channel. Connect here using an RCA cable or S-Video cable.

17. Component VIDEO(YPbPr) OUTPUT

Using component(YPbPr) video cable to connect to external video device like projector.

18. Component VIDEO 2(YPbPr) & OPTICAL AUDIO INPUT

Using component(YPbPr) cable to connect from external device with YPbPr output like DVD player.

Using Optical audio cable to connect from external device with Optical audio output.

19. Component VIDEO 1(YPbPr) & COAXIAL AUDIO INPUT

Using component(YPbPr) cable to connect from external device with YPbPr output like DVD player.

Using Coaxial audio cable to connect from external device with Coaxial audio output.

20. OPTICAL and COAXIAL INPUT

Optical/Coaxial audio input can be used individually, or co-operate with YPbPr 1 or 2 video input.

21.AC POWER CONNECTOR - Connect the power cable here

22.AC INPUT SWITCH-Manual switch between ~220V/ 50Hz and ~110V/60Hz

3