Canon MX410 manual Step Sixteen, If the Detected Access Points List screen appears

Page 14

Installing the Drivers & Software

Step Fifteen, Continued

If the Detected Access Points List screen appears.

1.Select the target access point name/network name (SSID).

2.Enter the network key.

Enter upper and lower case letters of the alphabet correctly. Letters are case sensitive.

To use WEP key number 2, 3 or 4, click WEP Key Number, then specify the WEP key number.

3.Click Connect.

Step Sixteen

When the Disconnect Cable screen appears, disconnect the network setup cable. Click Next.

14

Image 14
Contents Pixma MX410 Navigation Tips for Macintosh Users Preparing to Connect My Multifunction to My Network Preparing to Connect My Multifunction To My Network Network Key Be sure to prepare an access pointAccess Point Name/Network Name Step One Step TwoClick Easy Install. Click Install Step Three Step FourNext Click InstallStep Five Step Six Step Seven Step EightDock screen, then click Next Step Nine Step TenSelect Agree or Do not Agree on the Add Easy-WebPrint EX to Step Eleven Step Twelve Step Thirteen PrinterStep Fourteen Step FifteenIf the Detected Access Points List screen appears Step SixteenStep Seventeen Complete or OKRegistering the Printer & Scanner Go to Step Three, Click More Printers in the Printer Browser window Step Three Register ScannerSelector EX screen, then click OK Step Four Step FiveSelect Canon MX410 series on the Canon IJ Network Scanner Step Six Step Seven Click Next on the Print Head Alignment RecommendedStep Eight Click Exit. Setup is complete Step Nine
Related manuals
Manual 15 pages 47.8 Kb Manual 20 pages 29.6 Kb