Canon MX410 manual Preparing to Connect My Multifunction To My Network

Page 4

Preparing to Connect My Multifunction

To My Network

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network.

Notes on Network Connection

The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manual or contact its manufacturer.

The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection.

4

Image 4
Contents Pixma MX410 Navigation Tips for Macintosh Users Preparing to Connect My Multifunction to My Network Preparing to Connect My Multifunction To My Network Access Point Name/Network Name Be sure to prepare an access pointNetwork Key Step One Step TwoClick Easy Install. Click Install Step Three Step FourStep Five Step Six Click InstallNext Step Seven Step EightSelect Agree or Do not Agree on the Add Easy-WebPrint EX to Step Nine Step TenDock screen, then click Next Step Eleven Step Twelve Step Thirteen PrinterStep Fourteen Step FifteenIf the Detected Access Points List screen appears Step SixteenStep Seventeen Complete or OKRegistering the Printer & Scanner Go to Step Three, Click More Printers in the Printer Browser window Step Three Register ScannerSelect Canon MX410 series on the Canon IJ Network Scanner Step Four Step FiveSelector EX screen, then click OK Step Six Step Seven Click Next on the Print Head Alignment RecommendedStep Eight Click Exit. Setup is complete Step Nine
Related manuals
Manual 15 pages 47.8 Kb Manual 20 pages 29.6 Kb