Set up a digital tuner with this antenna
You can install available channels with the digital TV tuner.This automatic process is part of the setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive viewable channels.
There are two ways to connect the antenna to the TV:
•Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically .
•Connect the antenna directly to the TV.
Tune to the analogue channels and find the best antenna location. Then re- connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner.
5 Frequently asked questions
Can this antenna work with Analogue transmissions?
Yes, this antenna can receive analogue television broadcasts in the UHF and VHF bandwidths.
Can this antenna receive digital or work with ATSC broadcasts?
Yes, this antenna is designed to receive ATSC and HDTV broadcasts in the UHF & VHF bandwidths.
Can the antenna be powered by a DC power supply in a boat, RV or camper?
Yes, there is a DC power socket located at the back of the antenna. Plug your cable/adapter
into the antenna and then into your power source.
Where should I place the antenna in order to get the best reception possible?
Choose a location near a window which gives the antenna a clear view of the transmitter.
Note
•• For best reception, place the antenna away from the metal surface to avoid interference.
How do I know how much gain (amplification) is required to receive a clear picture?
Once you have the VHF dipoles extended to the longest length, turn on the amplifier. Turn the amplifier up to the max position and then reduce as needed. In some case, you need to turn the amplifier down to receive a clearer picture.
Can I set up this antenna with a digital tuner? Yes, this antenna can be set up with a digital tuner. (see ‘Set up a digital tuner with this antenna’ on page 8)
8EN