Stacker Relocation
The stacker cannot be moved except by a DRC rigger.
To ensure that the stacker operates reliably after moving it to a new location, consider the following guidelines:
The new location must provide minimum clearances around the stacker. These clearances are shown in the diagram on the right.
The flooring in the new location must be adequate to support the weight of the stacker and be reasonably level.
The new location must be well ventilated and maintain an even temperature. Extreme temperature or humidity changes can affect the stacker.
Power source receptacles must be properly grounded.
In addition to the above requirements, the surface must be at least 157” (400cm) x153.5” (390cm) and be capable of supporting at least 108lb (49kg) stacker and the 880lb (400kg) printer attached.
8
Top View
Stacker |
|
|
|
power cord |
|
|
|
12' |
| 66" |
|
|
|
| |
|
| (168cm) |
|
Printer | Stacker |
|
|
power cord |
|
| |
|
|
| |
12' |
|
| 153.5” |
(3.66m) |
|
| |
|
|
| (390cm) |
| 721P | 39.5" |
|
| (100cm) |
| |
|
| 48" |
|
35" | 57" | (122cm) | 65" |
| |||
(90cm) | (145cm) |
| (165cm) |
| 157” |
|
|
| (400cm) |
|
|