Chapter 2
Installation
The procedure for getting the P114F up and running depends on whether the switch is to operate standalone or as part of a stack.
First, attach the adhesive rubber feet to the base of the P110 switch. If the switch is to be rack mounted, do not attach the feet.
Standalone Operation - Plug ‘n’ Play
Getting the P110 switch working is quick and easy:
1.Connect the power cable to the switch.
2.Connect the cables to the front panel ports.
The switch is now fully operational. By default, all ports will operate in half duplex mode.
To ensure proper ventilation, ensure that the P110 NMA slot is closed.