Appendices
Appendices
Hardware Disaster Recovery Cluster Install
If you are going to have the disaster recovery cluster on node1 = 192.168.80.3 and node2 = 192.168.80.4 then you would run like this on both installs:
•Modify
########################################################################
#######
#######
####### Cluster options
#######
#
##for a clustered installation node1 and node2 must be set the same
##on each of the hosts in the cluster, same ordering node1=192.168.80.3 - THE IP OF DR NODE 1 node2=192.168.80.4 - THE IP OF DR NODE 2
#
#clusterJdbcMcast=229.10.10.20
#clusterMcast=228.10.10.20
#clusterName=disasterrecovery
#
########################################################################
#######
########################################################################
#######
#######
####### Disaster Recovery options
#######
#
##When this server will use a disaster recovery site set the following:
# heartbeatEnabled=true
# disasterEnabled=true
# disasterHost=
# disasterUser=pserver
# disasterPass=pserver
# heartbeatPort=8764
#
#
##When this server IS the disaster recovery site set the following: disasterServer=true
disasterServerUser=admin
heartbeatInterval=30000
##comma separated list of hosts to check heartbeatHosts=192.168.80.1,192.168.80.2
#
#
EncrypTight Manager Installation Guide | 31 |