Black Box ET0100A, ET1000A, ET0010A Ordering of actions is important, Hardware Cluster Install

•Modify the /opt/scripts/policyserver-init.conf and set the following. Emacs, nano, and vi are available on the OS.

########################################################################

#######

#######

####### Cluster options

#######

#

## for a clustered installation node1 and node2 must be set the same

##on each of the hosts in the cluster, same ordering node1=192.168.80.1

node2=192.168.80.2

#

# clusterJdbcMcast=229.10.10.10

# clusterMcast=228.10.10.10

# clusterName=policyserver

#

###############################################################################

Run the installation script:

/etc/init.d/policyserver-install

It is important that the ordering of IP addresses stays the same for node1 and node2 on both machines in the cluster.

Ordering of actions is important.

You should install in the following steps:

1Deploy OVA app server #1 (See Appendices - EncrypTight Manager OVA Deployment Using vSphere Client)

2Deploy OVA app server #2 (See Appendices - EncrypTight Manager OVA Deployment Using vSphere Client)

3Assign IP of app server #1

4Assign IP of app server #2

5Run cluster install on app server #1 ( same order of IP addresses on both )

6IMPORTANT: WAIT for app server #1 to fully start

7Run cluster install on app server #2 ( same order of IP addresses on both )

Once installation is complete you can view the web interface from either of the cluster nodes IP addresses.

To verify that the cluster is in place check the Platform -> Utilities page DB Nodes and Appserver Nodes.

Hardware Cluster Install

If you are going to have the cluster on node1 = 192.168.80.1 and node2 = 192.168.80.2 then you would run like this on both installs:

Modify the /opt/scripts/policyserver-init.conf and set the following. Emacs, nano, and vi are available on the OS.

12 EncrypTight Manager Installation Guide