########################################################################
#######
########################################################################
#######
#######
####### VM tuning options
#######
#
##max number of workder threads in the application server, MUST be more than 2 x mdbQueueThreads
maxServerThreads=500
##max number of high queue threads, max number of low queue threads mdbQueueThreads=200
#
##at least 2G of RAM
#minMemory=512
#maxMemory=768
#permSize=128
#maxPermSize=256
## at least 4G of RAM minMemory=768 maxMemory=1280 permSize=128 maxPermSize=384
## additional JVM options
#
###############################################################################
Run the installation scripts:
It is important that the ordering of IP addresses stays the same for node1 and node2 on both machines in the disaster recovery cluster.
Be sure that the following TCP and UDP ports are available between each server in the disaster recovery cluster:
TCP 21
TCP 2221
TCP 22
TCP 80
TCP 8080
TCP 443
TCP 8443
TCP 8764
TCP 5432
TCP 47788
TCP 47799
UDP 45588
UDP 46688
32 | EncrypTight Manager Installation Guide |