![Running the Installation Script](/images/new-backgrounds/82518/8251821x1.webp)
Installation Examples
4 Type 1 and press Enter to exit the menu.
Note that you can use the same menu to assign a hostname, specify a DNS server, set up a proxy server, or view the current networking configuration.
Running the Installation Script
Once the virtual machine has been deployed and networking parameters are configured, you need to run a script to specify the type of installation you are setting up. The options include:
•
•
•
Stand alone - a single virtual machine Cluster - multiple virtual machines
Disaster recovery - a virtual machine that services as a disaster recovery server for either a stand alone installation or a cluster.
You must log into the virtual machine in order to complete the installation. Log in using the default account of root with the password pserver.
To run the stand alone installation script:
•In the console window, use the arrow keys to highlight Login and press Enter.
•At the login prompt, type root and press Enter.
•At the Password prompt, type pserver and press Enter.
If you would like to modify settings you can
Once modified you can run the installation script:
System Requirements
VM
•
•
•
2G of RAM
40G of disk space
1 processor core
Hardware
•
•
•
2G of RAM
40G of disk space
1 processor core
Virtual Machine Cluster Install
These install options are valid in a VM or on hardware
If you are going to have the cluster on node1 = 192.168.80.1 and node2 = 192.168.80.2 then you would run like this on both installs:
EncrypTight Manager Installation Guide | 11 |