Belkin F1UP0001 user manual WEB Interface Encryption 64-bit manually

Page 19

WEB CONFIGURATION

128-bit automatically: Selecting this setting will allow you to enter a pass phrase and the Print Server will determine the keys automatically. (Warning: Choosing “automatically” will generate new keys that may not function with an existing network. If your network keys [in your router] are already set, use “manually” instead.)

WEB Interface – Encryption (64-bit manually)

This menu allows the user to enter keys for 64-bit encryption.

To set encryption for your Print Server:

WEP Mode: Select encryption mode from the drop-down menu.

WEP Key: Select the appropriate Key number and enter hex digits into all 20 fields consistent with your existing wireless network settings.

(Warning: Any inconsistencies with your network’s settings will cause the Print Server not to connect to your wireless network).

Authentication Mode: Default is “open + shared”, which operates with all 64-bit networks.

Apply Changes: Click this button to complete your settings.

NOTE: After changing encryption settings, the Print Server must be restarted

(power-cycled) to reestablish communication with the network.

17

Image 19
Contents Wireless USB Print Server Table of Contents Introduction Package ContentsSystem Requirements Overview FeaturesApplications and Advantages Product Specifications LAN LED Knowing your Print ServerPrinter 1/Printer Connecting the Print Server Using the Setup Wizard Enjoy your Print Server Install Print Drivers Setup for Advanced UsersSet Up Print Server Setup for Advanced Users Configure Computers to Print to the Print Server Setup for Advanced Users Accessing the Web Configuration Menus WEB ConfigurationWeb Interface Home Web Interface Login ScreenWeb Interface IP Address Web Interface Channel and Ssid Web Interface Encryption WEB Interface Encryption 64-bit manually WEB Interface Encryption 64-bit automatically WEB Interface Encryption 128-bit manually WEB Interface Encryption 128-bit automatically Web Interface Site Survey Web Interface Print Server Configuration Web Interface Upgrade Firmware Web Interface System Settings Changing Password Printing to Multiple Print Servers Printing to Multiple Print Servers Printing to Multiple Print Servers Opening the Belkin Port Monitor Advanced Menu Belkin Port Monitor Advanced MenuBelkin Port Monitor Advanced Menu Belkin Port Monitor Advanced Menu Belkin Port Monitor Advanced Menu Using the Print Server for FTP Printing Using the Print Server for FTP Printing Using the Print Server for FTP Printing Cannot find Print Server TroubleshootingNo printer error screen appears during setup Subnet warning error screen appears during setupTroubleshooting Technical Support Federal Communications Commission Notice InformationFCC Statement ModificationsEurope-European Union Notice Canada-Industry Canada ICBelkin Corporation Limited Lifetime Product Warranty P74390-A