Belkin F1UP0001 user manual WEB Configuration, Accessing the Web Configuration Menus

Page 14

WEB CONFIGURATION

Accessing the Web Configuration Menus

1.Power up the Print Server that is within wireless range of your wireless network or is connected to your network using an Ethernet cable.

2.Allow approximately one minute for the Print Server to boot and obtain an IP address.

3.Determine the Print Server’s IP address, using one of the following methods:

a)New Print Servers are configured to receive IP addresses dynamically. If your network has a DHCP server, the Print Server will obtain an IP address from your network. If the DHCP server supports a client list, the client list will list the IP address assigned to the Print Server. If a DHCP server is not available, after 1.5 minutes the Print Server will revert to 192.168.2.253.

b)If the Print Server has been configured previously, then it will have been set to a static IP address that could be different for every network.

Note: Restoring factory defaults on the Print Server by holding in the reset button for 10 seconds while repowering the Print Server will restore the IP address to dynamic.

c)Run the program “PSF.exe” from the Installation CD. This will find the IP address and link automatically to the web-based management interface.

d)Go to the last step of the Print Server Installation Wizard, which has an Advanced button that finds the IP address and links automatically to the web-based management interface.

4.Type the Print Server’s IP address into your Internet browser from any computer. For example, if your IP address is 192.168.2.225, type “192.168.2.225” (do not type in anything else such as “http://” or “www”). Then press the “Enter” key.

12

Image 14
Contents Wireless USB Print Server Table of Contents System Requirements Package ContentsIntroduction Applications and Advantages FeaturesOverview Product Specifications Knowing your Print Server LAN LEDPrinter 1/Printer Connecting the Print Server Using the Setup Wizard Enjoy your Print Server Set Up Print Server Setup for Advanced UsersInstall Print Drivers Setup for Advanced Users Configure Computers to Print to the Print Server Setup for Advanced Users WEB Configuration Accessing the Web Configuration MenusWeb Interface Login Screen Web Interface HomeWeb Interface IP Address Web Interface Channel and Ssid Web Interface Encryption WEB Interface Encryption 64-bit manually WEB Interface Encryption 64-bit automatically WEB Interface Encryption 128-bit manually WEB Interface Encryption 128-bit automatically Web Interface Site Survey Web Interface Print Server Configuration Web Interface Upgrade Firmware Web Interface System Settings Changing Password Printing to Multiple Print Servers Printing to Multiple Print Servers Printing to Multiple Print Servers Belkin Port Monitor Advanced Menu Opening the Belkin Port Monitor Advanced MenuBelkin Port Monitor Advanced Menu Belkin Port Monitor Advanced Menu Belkin Port Monitor Advanced Menu Using the Print Server for FTP Printing Using the Print Server for FTP Printing Using the Print Server for FTP Printing Troubleshooting Cannot find Print ServerSubnet warning error screen appears during setup No printer error screen appears during setupTroubleshooting Technical Support Modifications InformationFCC Statement Federal Communications Commission NoticeCanada-Industry Canada IC Europe-European Union NoticeBelkin Corporation Limited Lifetime Product Warranty P74390-A