Troubleshooting
Installation CD-ROM does not start Setup Utility
If the
If the Setup Utility screen does not appear within
Power LED does not come ON; Adapter is not working
If the LED indicators are not ON, the problem may be that the Adapter is not connected or installed properly.
Verify that the Adapter is plugged firmly into the USB slot of your computer. Check to see that the drivers for the Card have been installed. Right click on the “My Computer” icon on your desktop. Choose “Properties” and navigate to the “Device Manager” and see if your USB device is listed without any errors. If an error is indicated contact Belkin Technical Support.
Link LED is blinking slowly; Cannot connect to a wireless network or the Internet
If your Adapter appears to be functioning properly, but you cannot connect to a network or you have a red wireless icon at the bottom of your screen, the problem may be that there is a mismatch between the network name (SSID) settings in your wireless network properties.
Check the SSID settings to see if they match. The SSID is
Note: To check the SSID settings or look for an available network,
32