Belkin F5D7001 user manual Interrupt Test, Loopback Test, LED Test

Page 39

Using the Belkin Wireless LAN Utility

Interrupt Test

This test verifies that the NDIS driver is able to receive interrupts from the network controller.

Loopback Test

This test verifies that the NDIS driver is able to send packets and receive packets from the network controller.

LED Test

This test verifies that your 802.11g wireless networking hardware is functioning correctly.

1

2

3

4

5

6

section

37

Image 39

Contents High-Speed Mode Wireless G Desktop Network Card Table of Contents Introduction Introduction Avoid Obstacles and Interference Cordless Phone PlacementSecure connections, VPNs, and AOL Choose the quietest channel for your wireless networkIntroduction Overview Product FeaturesFrequently changing environments Connection rates of up to 54Mbps or 125Mbps* using HSMDifficult-to-wire environments Compatibility with 802.11b productsLink LED orange Card ConnectorDetachable Antenna Product Specifications Activity LED greenSystem Requirements Package ContentsInstall the Software Installing and Setting Up the CardInsert the Card into the Computer Installing and Setting Up the Card Let Windows Finish the Installation Installing and Setting Up the Card Installation is now complete Setting Wireless Network Preferences Click on the Wireless Networks tab Enable RadioAvailable Networks Properties Preferred NetworksAdd, Remove System Tray IconAny Available Network Access Point Preferred Access Point Infrastructure Networks OnlyComputer-to-Computer Ad-Hoc Networks Only Securing your Wi-FiNetwork WEP Wired Equivalent Privacy Bit WEPEncryption Keys C3030FAF0F4BB2C3D44BC3D4E7 = 128-bit WEP key WPA Wi-Fi Protected AccessUsing a Hexadecimal Key Changing the Wireless Security Settings Bit WEP Encryption WEP SetupC3030FAF0F4BB2C3D44BC3D4E7 = 128-bit WEP key WPA-PSK no server WPA with server Settings Using the Belkin Wireless LAN Utility Type your WEP key in the Network key box Using the Belkin Wireless LAN Utility Using the Belkin Wireless LAN Utility Monitoring the Status of your Network Connection Radio State SignalClient IP Address Network Connection TypeClick on the Statistics tab Monitoring Data TransferFinding Available Networks in your Area Sprom Format Version Performing Diagnostic Tests on your ConnectionClick on the Diagnostics tab Control RegistersInterrupt Test Loopback TestLED Test Can’t connect to the Internet wirelessly TroubleshootingName of your wireless network appears in Available Networks Power LED does not come on Card is not working Installation CD-ROM does not start Setup UtilityLink LED is solid but cannot connect to the Internet Data transfer is sometimes slow Signal strength is poorTroubleshooting Wireless PCI Card is not Detected by Operating System What’s the difference between 802.11b, 802.11g and 802.11a? Wireless ComparisonEurope 00 800 223 55 Australia 1800 666 Technical SupportFederal Communications Commission Notice FCC StatementInformation Belkin Corporation Limited Lifetime Product Warranty Belkin Tech Support

Related manuals

Manual 52 pages 23.2 Kb