Belkin F5D4077UK user manual Configuration, Adding Another Adapter to the Network, Sections

Page 10
CONFIGURATION

CONFIGURATION

Table of Contents

SECTIONS

1

Adding Another Adapter to the Network

1.If the default network password has been changed, a new Adapter will have to load the new password before it can join the network. Press the “Encryption” button on the new unit for 10 seconds. The password on this Adapter has now been changed to a random value.

2.Press the “Encryption” button on an encrypted unit for more than 1 second, but less than three seconds.

3.Within two minutes, press the “Encryption” button on the new unit for more than 1 second, but less than three seconds.

4.The new device has now been loaded with the network password and added to the current powerline network.

2

3

Resetting to Factory Defaults

Using a pointed object, press and hold the “Reset” button for one second to restore defaults. This procedure resets the network password to the default out-of-box value.

Surf Powerline Networking Adapter

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User Manual Surf POWERLINE NETWORKING ADAPTERF5D4077uk Installing and Setting Up the Adapters TABLE OF CONTENTSSECTIONS Table of ContentsINTRODUCTION Table of ContentsFeatures INTRODUCTIONProduct Specifications SECTIONS Package ContentsSystem Requirements Power LEDINSTALLING AND SETTING UP THE ADAPTERS Overview Hardware Setup1. Plug your network cable into the device’s RJ45 network adapter port Changing the Network Password CONFIGURATIONThe Adapter uses 128-bit AES encryption to block access from the outside. By default, the protection is enabled. However, it is recommended that you change the default network password with the “Encryption” button located on the units Resetting to Factory Defaults CONFIGURATIONAdding Another Adapter to the Network
Top Page Image Contents