Belkin F5D4077UK user manual Overview, Hardware Setup, Installing And Setting Up The Adapters

Page 8
Overview

INSTALLING AND SETTING UP THE ADAPTERS

Table of Contents SECTIONS123

Overview

Hardware Setup

Installation of the Surf Powerline Networking Adapter takes only seconds and does not require setting up long wires throughout the house. Simply plug the units directly into any available wall outlet and connect to any device with an Ethernet port. Users have the option to randomly change the security password for their powerline network.

1. Plug your network cable into the device’s RJ45 network adapter port.

2. Plug the other end of your network cable into the RJ45 port located at the back of the Adapter.

3. Plug the power cable or wall adapter into the power connector at the back of the Adapter.

4. Insert the power plug of your power cable or wall adapter directly into a power outlet in the wall.

NOTE: Do not plug the device into a UPS or power strip with surge protection as they may filter the powerline signal.

5. Repeat this process for the second Adapter.

Surf Powerline Networking Adapter

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents F5D4077uk Surf POWERLINE NETWORKING ADAPTERUser Manual TABLE OF CONTENTS SECTIONSInstalling and Setting Up the Adapters Table of ContentsINTRODUCTION Table of ContentsFeatures INTRODUCTIONProduct Specifications Package Contents System RequirementsSECTIONS Power LEDINSTALLING AND SETTING UP THE ADAPTERS 1. Plug your network cable into the device’s RJ45 network adapter port Hardware SetupOverview The Adapter uses 128-bit AES encryption to block access from the outside. By default, the protection is enabled. However, it is recommended that you change the default network password with the “Encryption” button located on the units CONFIGURATIONChanging the Network Password Adding Another Adapter to the Network CONFIGURATIONResetting to Factory Defaults
Top Page Image Contents