Belkin F1DH102L, F1DH104L Firmware-Upgrade Guide, Connect your KVM Switch to the Host PC Step

Page 18

Firmware-Upgrade Guide

Connect your KVM Switch to the Host PC

Step 5.

Now press the first front-panel button on the KVM Switch until you hear three beeps. The KVM Switch has now entered into the upgrade mode.

Step 6.

Check to make sure the KVM cables from port 1 are connected to the host PC.

Note: A special upgrade cable is not needed to perform the upgrade since you can use the same KVM cable that you use for connecting to the computers. However, depending on the different models, the KVM cables you use will vary.

Step 7.

Click the “Browse” button and locate the firmware-upgrade file, which is indicated with a file extension such as “.blk”.

Select the upgrade file (for example: “UCF-30-11-07.blk”) and click “Open” to load the file. Then click “Upgrade” to make it ready for upload.

Image 18

Contents OmniView Soho KVM Switch with Audio Table of Contents Package Contents IntroductionFeature Overview OverviewEquipment Requirements Front View Unit Display DiagramsOverview Back ViewSpecifications DimensionsInstalling the KVM Switch Pre-ConfigurationConnecting the KVM Switch StepInstalling the KVM Switch Audio and Microphone ConnectionsConnect the Audio Powering Up the Systems Using the KVM Switch Selecting a Computer Using Direct-Access Port SelectorsHot-Key Preceding Sequence Configuration Using the KVM Switch Select Audio & Mic Channel ScrLk + ScrLk + FySwitching the Audio/Mic Firmware-Upgrade Guide Prepare your KVM Switch and the Host PC StepHost PC since the mouse is used to perform the upgrade Step Activate the Firmware-Upgrade Utility Program Firmware-Upgrade Guide Connect your KVM Switch to the Host PC StepBegin the File Upload Step Upgrade Using the Mac Version Utility Prepare your KVM Switch and the Mac Host StepFirmware-Upgrade Guide Firmware-Upgrade Guide Connect your KVM Switch to the Mac Host Step Begin the File Upload Step Firmware-Upgrade Guide What does flash-upgrade capability mean? FAQsWhich operating systems does the KVM Switch support? Do I have to install any software to use the KVM Switch?Does the KVM Switch support Microsoft keyboards? Can I use the KVM Switch to switch video signals only?Does the Soho KVM Switch support Linux? How long is the warranty for the KVM Switch?Troubleshooting Am getting a black screen on my monitorMouse is lost when I switch to a different channel KeyboardTroubleshooting Mouse is not detected at boot upComputer boots up fine, but the mouse does not work Audio and Microphone Firmware-Upgrade Troubleshooting Progress bar stops for a long time without any advancementInformation FCC StatementCE Declaration of Conformity How to get service What will we do to correct problems?What is not covered by this warranty? InformationHow state law relates to the warranty Belkin Tech Support Belkin B.V Belkin International, Inc

F1DH104L, F1DH102L specifications

The Belkin F1DH102L and F1DH104L are advanced KVM (Keyboard, Video, Mouse) switches that enable users to control multiple computers using a single set of peripherals. Designed for both home and office environments, these devices are ideal for those who need seamless switching between different systems without the clutter of multiple keyboards and monitors.

The F1DH102L supports two computers, while the F1DH104L accommodates up to four systems, making both models versatile for various user needs. One of the standout features of these KVM switches is their support for high-resolution video. They are capable of delivering crisp video output up to 1920x1200, ensuring that users do not compromise on display quality when switching between systems.

Both models boast plug-and-play installation, which simplifies setup and reduces the need for additional software or drivers. Users can easily connect their computers using standard USB and VGA cables, allowing for speedy configuration and immediate usage. This is particularly beneficial in multi-user environments where time efficiency is crucial.

The F1DH102L and F1DH104L KVM switches also incorporate LED indicators that provide visual feedback on the selected computer. This feature enhances usability, making it easy for users to identify which system is active at a glance. Moreover, both models support hotkey switching, allowing users to toggle between computers using predefined keyboard shortcuts, streamlining the workflow further.

Another important characteristic of these KVM switches is their robust design. Built with high-quality materials, they ensure long-lasting performance and reliability. The compact form factor also means that they can be easily integrated into any workspace without taking up excessive space.

In terms of connectivity, both models offer compatibility with various operating systems, including Windows, Mac, and Linux, making them suitable for a wide range of users. Additional features such as support for USB devices allow users to connect peripherals like printers and external drives, enhancing their overall productivity.

In conclusion, the Belkin F1DH102L and F1DH104L KVM switches stand out in the market for their combination of high-resolution output, ease of use, and robust design. They are perfect solutions for anyone looking to streamline their computing environment while maintaining optimal performance and functionality.