Belkin F1DH104L, F1DH102L user manual Begin the File Upload Step

Page 19

Firmware-Upgrade Guide

Begin the File Upload

Note: Before hitting the “Upgrade” button on the utility program, you should make sure that you are focused on port 1 of the KVM Switch where you have the computer connected. If not, switch to that computer before hitting the “Upgrade” button. Once the “Upgrade” button is pressed, the focus is immediately switched to the last button (port 2 on the 2-port model, port 4 on the 4-port model) and then back to port 1 after the completion of the upgrade.

Step 8.

After you click the “Upgrade” button, the file-transfer progress will begin in seconds and can be monitored through the advancement of the progress bar. Wait until the progress bar runs to its full length for the upgrade process to be completed.

Note: Meanwhile, be careful not to power off the computer or disconnect the USB-cable connection. Otherwise, the file upload will be interrupted and the upgrade process will be aborted. If that does happen, please refer to the “Firmware-Upgrade Troubleshooting” section.

The file upload is finished when the progress bar runs through 100 percent and a prompt tells you that the upgrade is OK.

Click “OK”. The firmware-upgrade process is complete.

1

2

3

4

5

6

7

8

section

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents OmniView Soho KVM Switch with Audio Table of Contents Introduction Package ContentsOverview Feature OverviewEquipment Requirements Back View Unit Display DiagramsOverview Front ViewDimensions SpecificationsPre-Configuration Installing the KVM SwitchStep Connecting the KVM SwitchAudio and Microphone Connections Installing the KVM SwitchConnect the Audio Powering Up the Systems Selecting a Computer Using Direct-Access Port Selectors Using the KVM SwitchHot-Key Preceding Sequence Configuration Select Audio & Mic Channel ScrLk + ScrLk + Fy Using the KVM SwitchSwitching the Audio/Mic Prepare your KVM Switch and the Host PC Step Firmware-Upgrade GuideHost PC since the mouse is used to perform the upgrade Step Activate the Firmware-Upgrade Utility Program Connect your KVM Switch to the Host PC Step Firmware-Upgrade GuideBegin the File Upload Step Prepare your KVM Switch and the Mac Host Step Upgrade Using the Mac Version UtilityFirmware-Upgrade Guide Firmware-Upgrade Guide Connect your KVM Switch to the Mac Host Step Begin the File Upload Step Firmware-Upgrade Guide Do I have to install any software to use the KVM Switch? FAQsWhich operating systems does the KVM Switch support? What does flash-upgrade capability mean?How long is the warranty for the KVM Switch? Can I use the KVM Switch to switch video signals only?Does the Soho KVM Switch support Linux? Does the KVM Switch support Microsoft keyboards?Am getting a black screen on my monitor TroubleshootingKeyboard Mouse is lost when I switch to a different channelMouse is not detected at boot up TroubleshootingComputer boots up fine, but the mouse does not work Audio and Microphone Progress bar stops for a long time without any advancement Firmware-Upgrade TroubleshootingFCC Statement InformationCE Declaration of Conformity Information What will we do to correct problems?What is not covered by this warranty? How to get serviceHow state law relates to the warranty Belkin International, Inc Belkin Tech Support Belkin B.V

F1DH104L, F1DH102L specifications

The Belkin F1DH102L and F1DH104L are advanced KVM (Keyboard, Video, Mouse) switches that enable users to control multiple computers using a single set of peripherals. Designed for both home and office environments, these devices are ideal for those who need seamless switching between different systems without the clutter of multiple keyboards and monitors.

The F1DH102L supports two computers, while the F1DH104L accommodates up to four systems, making both models versatile for various user needs. One of the standout features of these KVM switches is their support for high-resolution video. They are capable of delivering crisp video output up to 1920x1200, ensuring that users do not compromise on display quality when switching between systems.

Both models boast plug-and-play installation, which simplifies setup and reduces the need for additional software or drivers. Users can easily connect their computers using standard USB and VGA cables, allowing for speedy configuration and immediate usage. This is particularly beneficial in multi-user environments where time efficiency is crucial.

The F1DH102L and F1DH104L KVM switches also incorporate LED indicators that provide visual feedback on the selected computer. This feature enhances usability, making it easy for users to identify which system is active at a glance. Moreover, both models support hotkey switching, allowing users to toggle between computers using predefined keyboard shortcuts, streamlining the workflow further.

Another important characteristic of these KVM switches is their robust design. Built with high-quality materials, they ensure long-lasting performance and reliability. The compact form factor also means that they can be easily integrated into any workspace without taking up excessive space.

In terms of connectivity, both models offer compatibility with various operating systems, including Windows, Mac, and Linux, making them suitable for a wide range of users. Additional features such as support for USB devices allow users to connect peripherals like printers and external drives, enhancing their overall productivity.

In conclusion, the Belkin F1DH102L and F1DH104L KVM switches stand out in the market for their combination of high-resolution output, ease of use, and robust design. They are perfect solutions for anyone looking to streamline their computing environment while maintaining optimal performance and functionality.
Top Page Image Contents