JVC KD-R325 Using Bluetooth devices, Register pair a Bluetooth device with KS-BTA100, Preparation

Using Bluetooth® devices

For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 9)

•For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.

Preparation

1Register (pair) a Bluetooth device with KS-BTA100.

Refer to the instructions manual supplied with KS-BTA100.

2Change the <SRC SELECT> settings of this unit.

	[Hold]	]<SRC SELECT> ]<R-AUX> ]
		<BT ADAPTER>
Using the Bluetooth mobile phone
		Adjusting the microphone volume
(Low)	(High) Volume level: High/ Normal (initial)/ Low
		• Receiving a call
		When a call comes in...
KS-BTA100		• Making a call
		Making a call to the last connected number from
		your phone.

•Switching between handsfree and phone While talking...

Microphone		• Ends/rejects call
		• Voice dialing
	[Hold]	Voice dialing is available only when the connected
		mobile phone has the voice recognition system. To
	(< 5 seconds)
		use this, speak the name you want to call clearly.

Using the Bluetooth audio device

1		2
]“BT AUDIO”		If playback does not start, operate the Bluetooth
(CD receiver)
		audio player to start playback.
[Press]	Selects track.
[Hold]	Fast-forwards or reverses the track.

About microphone volume:

• When you turn off the power of the CD receiver, the volume level changes to Normal.

14

ENGLISH