Belkin F1DD102L user manual Audio & Mic Switching ScrLk + ScrLk + Q

Using the KVM Switch

To modify the hot-key preceding sequence from the default Scroll Lock, you can either hit the hot-key sequence: scrlk – scrlk – H – (y), y = SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK (as detailed in the Hot-Key Quick Reference Table below).

or

You can use another method: Press and hold the last button to enter the hot-key setting mode.

Step 1. Press and hold the last button (i.e., the second button on the 2-port model or the fourth button on the 4-port model) till you hear two beeps. Then release the button.

Step 2. Within two seconds, you should hit any of the selectable hot-key triggers (y), y = SCROLL LOCK, CAPS, ESC, F12, NUM LOCK, LEFT CTRL, or RIGHT CTRL to be your hot-key trigger.

For example, if you hit CAPS after hearing the two beeps, then the hot key will be: CAPS – CAPS – command key.

For detailed hot-key sequences and their corresponding functional commands, please refer to the Hot-Key Quick-Reference Table below.

Hot Key Quick Reference Table

2-/4-Port SOHO KVM Switch with Audio -- & Mic -- Operation Commands for Hot Keys/Front-Panel Buttons

Hot-key sequence = [ScrLk] + [ScrLk] + Command key(s)

* user-definable preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK, LEFT_CTRL, RIGHT_CTRL

Command	Hot Keys1	Front-Panel Buttons	Description
	ScrLk + ScrLk + (x)
Select Computer Channel 2	(x is a top-row number	Press the computer icon on	Select the active computer channel
(Joint-select PC port/audio	key) x = 1~2 / x = 1~4	the left of a button to select	(Hot key: Joint-select PC port/audio & mic,
& mic, if binding is enabled)	for PC channel no.	the active computer channel	if binding is enabled)
Select Audio & Mic Channel 2	ScrLk + ScrLk + (Fy)		Select the active audio & mic channel
(Joint-select PC port and audio	Fy = F5~F6/Fx=F5~F8	--	(Hot key: Joint-select PC and audio & mic channel,
& mic, if binding is enabled)	(Fy is a function key)		if binding is enabled)
Bind Computer and			Enable the binding of PC port and audio & mic
			switching. (Hot key: Once this feature is enabled, any
Audio & Mic Switching 2	ScrLk + ScrLk + Q	--
[Default]			computer and/or audio & mic switching by hot keys is
			bound together) (factory default)
Unbind PC and	ScrLk + ScrLk + W	--	Disable the binding of PC port and audio
Audio & Mic Switching 2			& mic switching
Next lower PC channel 2	ScrLk + ScrLk + 		Select the next lower connected PC channel
(Joint-select PC/audio & mic,		--	(Hot key: Joint-select PC/audio & mic, if binding
	(arrow up)
if binding is enabled)			is enabled)
Next higher PC channel 2	ScrLk + ScrLk + 		Select the next higher connected PC channel
(Joint-select PC/audio & mic,		--	(Hot key: Joint-select PC/audio & mic, if binding
	(arrow down)
if binding is enabled)			is enabled)
Previous PC channel	ScrLk + ScrLk +	--	Toggle between the previous channel and
	Backspace		current channel
	ScrLk + ScrLk +	Press and hold down last
		button (Button 2 / Button 4)
	H + (y)
		until you hear three beeps,
Define Hot-Key	y = SCROLL LOCK,		Select the hot-key preceding sequence among
		release the button, and then
Preceding Sequence	CAPS, ESC, F12, NUM		6 alternative keys
		press (y) key. This resets
	LOCK, LEFT_CTRL,
		hot-key preceding sequence
	or RIGHT_CTRL
		to SCROLL LOCK.
	Open Note Pad		Read the version of firmware that is currently on
Read KVM			the KVM Switch. This is helpful when a firmware
		--	upgrade is performed as it gives you the ability to read
Firmware Version	ScrLk + ScrLk + V
			the version of firmware, before and after the upgrade,
			to ensure the firmware has installed correctly.

1

2

3

4

5

6

7

8

section

13