Belkin P75209 manual Connecting Computers to the Switch required

Page 15

Installation

Step 3 Connecting Computers to the Switch (required)

3.1Make sure all computers and the Switch are powered off.

3.2Using the Belkin All-In-One USB KVM Cable Kit (F3X1962bXX), connect the male VGA connector to the monitor port on your computer. Then connect the female VGA connector to the CPU monitor port on the Switch labeled “VGA 01”. (Refer to diagram below.)

3.3Using the Cable Kit, connect the USB Type A connector to an available USB port on your computer. Then connect the USB Type B connector to the USB port on the Switch labeled “USB 01”. (Refer to diagram below.)

3.4Repeat steps 2 and 3 for each additional USB computer you wish to connect.

Note: The Cable Kit must be connected directly to a free USB port on your computer, with no USB hubs or other devices in between.

12

Image 15
Contents Belkin Tech Support Belkin B.VBelkin Corporation F1DN102U F1DN104U F1DN108U Table of Contents Introduction Package ContentsOverview Security FeaturesOther Features All-In-One USB KVM Cable Kits CablesMice System RequirementsOperating-System OS Platforms KeyboardsSide View Unit Display DiagramsFront View Back ViewSpecifications Installation Pre-ConfigurationWhere to place the Switch Bracket Installation F1DN108U Mounting the Switch optionalBracket Installation F1DN102U and F1DN104U Connecting the Console to the Switch required Connecting Computers to the Switch required Powering Up the Systems required Selecting a Computer Using Port Selectors Using your SwitchHttp//niap.nist.gov/cc-scheme/nstissp-faqs.html Frequently Asked QuestionsTroubleshooting GeneralVideo Keyboard Mouse FCC Statement InformationHow state law relates to the warranty How to get service