Hardware Installation

Because USB is hot swappable, you need not power down your PC.

•Connect the jack of the power adapter and plug it into the back of the Multi-port Hub

•Find an unused electrical outlet, and plug in the power adapter

•Plug the flat end (A plug) of the USB cable into a free USB port on your PC

•Plug the square end (B plug) of the USB cable into the USB upstream connector located on the back of the Multi-port Hub

Windows® will automatically detect the Multi-port Hub and start installing its drivers. Windows will prompt you for the software. See the next sections for details on how to install the software.

Before you can install the software, you need to know what version of Windows® you are using. If you are not sure what version of Windows® you are running, click on START, select SETTINGS, click on CONTROL PANEL, then double-click on SYSTEM. An applet will appear and provide you with your system’s information.