Serial Plug-and-Play Device Detection

Adding Optional DOS Box Support

10.You will be asked for the “USB to Serial installation” CD. Insert the installation CD into your CD drive and click “OK”. If a dialog appears stating that a file could not be found, make sure that the “Copy files from:” edit box contains the name of your CD drive along with “:\Win98” and click “OK”.

Once DOS Box support is enabled for a specific USB Serial Adapter device, an additional Port entry in the “Device Manager” will be created, labeled “16550 COM Port Emulator”. You will also be able to disable and enable this feature.

To disable or re-enable DOS Box support, follow steps 1-6 above. If you are disabling DOS Box support, the check mark will disappear.

Serial Plug-and-Play Device Detection

A Plug-and-Play device, such as a modem, can be detected in one of two ways:

1.Attach the serial device to the USB Serial Adapter. Unplug the cable and plug the USB B connector to the USB Serial Adapter.