Installation

Step 1 Connecting the Transmitter to the Computer or KVM Switch

1.1Disconnect all computers from the electrical power supply.

1.2Using the Transmitter unit, connect the built-in VGA and USB cables to the monitor and USB ports on your computer or to the console ports on your KVM switch.

(Refer to diagram below.)

Transmitter

Step 2 Connecting the Local Console to the Transmitter

2.1From your local console, connect your monitor to the VGA console port on the Transmitter unit. (Refer to diagram below.)

2.2Connect your keyboard and mouse to the USB console ports on the Transmitter unit. (Refer to diagram below.)

Transmitter