Installation
Step 4 Connecting the Transmitter to the Receiver
Using a CAT5 cable, connect one end into the RJ45 port on the Transmitter unit. Connect the other end to the RJ45 port on the Receiver unit. (Refer to diagram below.)
USB | USB |
|
Console |
|
|
| Local CPU |
| Remote CPU 5V/ 2.5A |
| Console |
| RJ45 |
Step 5 Powering up the Systems
5.1Attach the power adapter to the power jack on the Receiver unit. Connect the adapter to a power source to power up the Receiver unit. The Transmitter unit will receive power from the computer or KVM switch to which it is connected.
5.2Power up your computers and KVM switch.
11