Belkin SE 2-Port user manual Adding Slave Units

Page 11

P73039_F1D102-eng_man.qxd 9/26/00 3:42 PM Page 10

Usage (continued)

Adding Slave Units

This assumes you already have a MASTER unit (or MASTER and slave units) set-up and working properly. Below is the procedure of daisy-chaining a new slave unit.

•Set the DIP switches of the slave unit to a unique slave BANK setting.

•Connect the computers using the same procedure outlined in steps 5 to 9 in the Hardware Installation section, page 6. DO NOT POWER UP THE COMPUTERS YET.

•Connect the power supply to the OmniView™ SE, and plug it into any available AC outlet. This is necessary to initialize the unit. You will see the LED display on the front panel show the unit’s bank address setting.

•Using the F1D108-CBL daisy-chain cable, connect one end to the "Master Input/Slave Output" of the unit. Refer to the diagram on page 11.

•If the previous unit is the MASTER, then the other end of the cable connects to the Master Input/Slave Output port of the MASTER (such as cable 1 in the diagram on page 11).

•If the previous unit is a slave, then the other end goes to the Slave Input port of the previous slave unit (such as cables 2 and 3 in the diagram on page 11).

•RESET the MASTER unit by pressing the BANK/SCAN and CHANNEL buttons simultaneously. This is necessary for the MASTER unit to detect the newly added slave unit.

•Verify that the MASTER unit has detected the new slave by pressing the BANK/SCAN button. If it detected the new slave properly, the LED "1" on the new slave unit will blink. If you have many slave units, you may have to press the BANK/SCAN button a couple of times to cycle through the preexisting slave units before reaching the newly added unit.

•Now you can power up the computers connected to the newly added slave unit. After all of the computers have booted up, you may need to RESET the MASTER unit again to detect the presence of powered computers on the new slave unit.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OmniView SE 2-Port Introduction FeaturesPackage Contents Technical Specifications Front Panel Product DetailIndividual Cables and Adapters List of Parts NeededPS/2 Cable Kit A3X982 AT Cable Kit A3X939Hardware Installation Back of OmniView SE PS/2 Style Keyboard PS/2 Mouse Back of PC Back of OmniView SE F2N036-XX Skip if YOU have only ONE OmniView SE UsageDaisy-chaining OmniView SE units with an OmniView PRO Adding Slave Units Daisy-Chaining the OmniView SE Usage Enable AutoScan mode AutoScan ModeKeyboard Problems TroubleshootingGeneral Problems Monitor/Video ProblemsProblems with computers using the serial mouse output Troubleshooting CE Declaration of Conformity Belkin Components One Year Product WarrantyInformation FCC Statement

SE 2-Port specifications

The Belkin SE 2-Port is a versatile and high-performance accessory designed to enhance connectivity and efficiency in both home and office environments. This compact device serves as a dual-port USB charger, catering to the growing need for simultaneous device charging. With the increasing number of gadgets we rely on daily, including smartphones, tablets, and wearables, having a reliable power source is essential.

One of the main features of the Belkin SE 2-Port charger is its dual USB output, which allows users to charge two devices at once without sacrificing charging speed. This is particularly advantageous in settings where multiple devices require power simultaneously, allowing users to keep their devices operational and charged throughout the day.

The Belkin SE 2-Port utilizes advanced charging technologies that ensure optimal power delivery to connected devices. It is equipped with smart detection technology, which recognizes the power needs of each connected device, adjusting the output accordingly to provide the fastest possible charge without overloading. This feature not only speeds up the charging process but also helps protect the longevity of the device batteries, thus enhancing overall user experience.

In terms of design, the Belkin SE 2-Port is compact and lightweight, making it an ideal travel companion. Its sleek profile allows it to fit seamlessly into any space, whether on a desk, nightstand, or in a travel bag. Furthermore, the device features built-in safety measures, including overcurrent protection and temperature control, ensuring that users can charge their devices with peace of mind.

The charger is compatible with a wide range of devices, from Apple iPhones and iPads to Android smartphones and tablets, making it a versatile solution for families and tech-savvy individuals alike. Its universal compatibility and efficient charging capabilities make the Belkin SE 2-Port a must-have gadget for modern lifestyles.

Whether working from home or on the go, the Belkin SE 2-Port charger provides a reliable and efficient way to keep multiple devices powered up. Its combination of dual-port functionality, smart charging technology, and safety features makes it an excellent addition to any tech arsenal. In a world where connectivity is key, the Belkin SE 2-Port ensures that users stay charged, connected, and ready to tackle the day ahead.
Top Page Image Contents