Listen to FM radio

•• [BT UPGRADE] (Bluetooth upgrade): upgrade Bluetooth software if available.

•• [SW VER] (software version): show the software version of this unit.

Note

•• If no button is pressed within 30 seconds, the menu exits.

1 Press SOURCE repeatedly to select tuner source.

2 Press and hold / for three seconds.

»»The radio tunes to a station with strong reception automatically.

3 Repeat step 2 to tune to more stations.

To tune to a weak station:

Press / repeatedly until you find optimal reception.

Note

•• You can program a maximum of 20 preset radio stations (FM).

1 In tuner mode, press MENU to access FM tuner menu.

»»[SCAN] is displayed.

2 Press OK, and then press / to scroll the menu options:

• [Strong] (strong stations): scan stations with strong signals only.

• [All] (all stations): scan all available FM radio stations.

3 Press OK to select an option.

4 In FM tuner mode, press SCAN.

»»The stations scanned are based on the selection in step 2.

»»The unit broadcasts the first scanned

FM radio stations.

1 Tune to an FM radio station.

2 Press PROG to activate programming mode.

»»[PROG] (program) blinks.

3 Press / repeatedly to select a number. 4 Press PROG again to confirm.

»»The frequency of the preset station is displayed.

5 Repeat above steps to store more FM stations.

Note

•• To remove a pre-stored station, store another station in its place.

Select a preset radio station

In FM mode, press / to select a preset number, and then press OK to confirm.

Radio Data System (RDS) is a service that allows FM stations to show additional information.

1 Tune to an RDS station.

2 Press RDS/INFO repeatedly to scroll through the following information (if available).

•Radio text message

•Program type

•Frequency

•Stereo or Mono

14EN