•• Aim the remote control directly at the sensor on the front of the unit.
No disc detected
•• Insert a disc.
•• Make sure that the disc is inserted with printed side facing upward.
•• Wait until the moisture condensation at the lens has cleared.
•• Replace or clean the disc.
•• Use a finalized CD or correct format disc.
Cannot display some files in USB device
•• The number of folders or files in the USB device has exceeded a certain limit.This phenomenon is not a malfunction.
•• The formats of these files are not supported.
USB device not supported
•• The USB device is incompatible with the unit.Try another one.
Poor radio reception
•• Increase the distance between the unit and your TV or VCR.
•• Connect and fully extend supplied antenna.
Music playback is unavailable on this unit even after successful Bluetooth connection.
•• The device cannot be used to play music through this unit wirelessly.
The audio quality is poor after connection with a
•• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them.
Bluetooth cannot be connected with this unit.
•• The device does not support the profiles required for this unit.
•• The Bluetooth function of the device is not enabled. Refer to the user manual of the device to find out how to enable the function.
•• This unit is not in pairing mode.
•• This unit is already connected with another
•If you pair and connect through NFC, make sure that:
•you have enabled both the Bluetooth and NFC features on your device.
•you have kept the NFC area of the device in touch with that of the speaker until you heard a beep.
The paired mobile device connects and disconnects constantly.
•• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them.
•• Some mobile phones may connect and disconnect constantly when you make or end calls.This does not indicate any malfunction of this unit.
•• For some devices, the Bluetooth connection may be deactivated automatically as a
Timer does not work
•• Set the clock correctly.
•• Switch on the timer.
Clock/timer setting erased
•• Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.
EN 19