Belkin F1DN102U manual Connecting Computers to the Switch required

Page 17

Installation

Step 3 Connecting Computers to the Switch (required)

3.1Make sure all computers and the Switch are powered off.

3.2Using the Belkin All-In-One USB KVM Cable Kit (F3X1962bXX), connect the male VGA connector to the monitor port on your computer. Then connect the female VGA connector to the CPU monitor port on the Switch labeled “VGA 01”. (Refer to diagram below.)

3.3Using the Cable Kit, connect the USB Type A connector to an available USB port on your computer. Then connect the USB Type B connector to the USB port on the Switch labeled “USB 01”. (Refer to diagram below.)

3.4Repeat steps 2 and 3 for each additional USB computer you wish to connect.

Note: The Cable Kit must be connected directly to a free USB port on your computer, with no USB hubs or other devices in between.

12

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Belkin International, Inc Belkin Tech SupportBelkin B.V F1DN102U F1DN104U F1DN108U Page Table of Contents Page Introduction Package ContentsOverview Security FeaturesOther Features All-In-One USB KVM Cable Kits CablesOperating-System OS Platforms System RequirementsKeyboards MiceFront View Unit Display DiagramsBack View Side ViewSpecifications Where to place the Switch InstallationPre-Configuration Bracket Installation F1DN108U Mounting the Switch optionalBracket Installation F1DN102U and F1DN104U InstallationConnecting the Console to the Switch required Connecting Computers to the Switch required Powering Up the Systems required Selecting a Computer Using Port Selectors Using your SwitchHttp//niap.nist.gov/cc-scheme/nstissp-faqs.html Frequently Asked QuestionsVideo TroubleshootingGeneral Keyboard Mouse TroubleshootingInformation How state law relates to the warranty How to get serviceSection
Related manuals
Manual 2 pages 38.37 Kb
Top Page Image Contents